条形平板中裂纹识别的遗传算法

研究条形平板中平行于上下边界的单一裂纹的识别问题。给出了当一声波入射这一条形平板时，裂纹参数与反射、透射系数之间的关系式，并应用遗传算法对裂纹进行了定量识别。计算结果表明本文给出的方法具有较好的识别精度。     

Experimental investigations on the dynamic behavior of a 2-DOF airfoil in the transitional Re number regime based on digital-image correlation measurements

The present paper investigates the fluid–structure interaction (FSI) of a wing with two degrees of freedom (DOF), i.e., pitch and heave, in the transitional Reynolds number regime. This 2-DOF setup marks a classic configuration in aeroelasticity to demonstrate flutter stability of wings. In the past, mainly analytic approaches have been developed to investigate this challenging problem under simplifying assumptions such as potential flow. Although the classical theory offers satisfying results for certain cases, modern numerical simulations based on fully coupled approaches, which are more generally applicable and powerful, are still rarely found. Thus, the aim of this paper is to provide appropriate experimental reference data for well-defined configurations under clear operating conditions. In a follow-up contribution these will be used to demonstrate the capability of modern simulation techniques to capture instantaneous physical phenomena such as flutter. The measurements in a wind tunnel are carried out based on digital-image correlation (DIC). The investigated setup consists of a straight wing using a symmetric NACA 0012 airfoil. For the experiments the model is mounted into a frame by means of bending and torsional springs imitating the elastic behavior of the wing. Three different configurations of the wing possessing a fixed elastic axis are considered. For this purpose, the center of gravity is shifted along the chord line of the airfoil influencing the flutter stability of the setup. Still air free-oscillation tests are used to determine characteristic properties of the unloaded system (e.g. mass moment of inertia and damping ratios) for one (pitch or heave) and two degrees (pitch and heave) of freedom. The investigations on the coupled 2-DOF system in the wind tunnel are performed in an overall chord Reynolds number range of $9.66\times 10^3\le \text{Re}\le 8.77\times 10^4$. The effect of the fluid-load induced damping is studied for the three configurations. Furthermore, the cases of limit-cycle oscillation (LCO) as well as diverging flutter motion of the wing are characterized in detail. In addition to the DIC measurements, hot-film measurements of the wake flow for the rigid and the oscillating airfoil are presented in order to distinguish effects originating from the flow and the structure.     

落柱式高压粘度装置的研制与压粘试验结果

作者研制了一台可测试润滑油在高压下的粘度和密度的落柱式高压粘度装置。本装置采用了新型高压粘性动密封和新型高压流变平垫静密封,经1200MPa试压、1000MPa压力下48小时保压和使用试验证明均无泄漏。用本装置所获得的压粘数据的重现性好、灵敏度高、可比性强。     

超声波对金属材料性能影响实验研究

通过对紫铜和低碳钢在超声波作用下材料特性的实验研究，探讨此类材料的一些特殊表现诸如屈服点降低，硬化率降低和延伸率降低等．建立了一套超声波材料拉伸实验系统，给出材料特性变化的实验数据并对这些特殊现象的形成机理进行初步探讨．给出了韧性金属材料在超声波作用下的本构方程，并与实验结果相比较，结果表明理论分析与实验结果一致     

用模态试验结果修改力学模型初探

利用试验模态分析结果,对有限元力学模型本身或其中某些参数进行修改是必要的和有工程意义的。这一“修改”既是数学上的优化问题又是工程设计问题。本文介绍自研制的“结构动力修改程序”,述及一般原理及框图,并给出一个悬臂梁实例。     

本征正交分解技术在屋盖风压场重建与预测中的应用

给出利用本征正交分解(POD)对屋盖风压场进行重建和预测的研究结果.对一个双坡屋盖用同步多点压力扫描系统进行了风洞试验,根据POD技术采用前若干阶本征模态重建屋盖风压场.采用两种方案预测未布置测压点位置的风压时间序列.第一种方案中利用插值技术获得没有测压点位置的本征模态值.第二种方案对参考屋盖和需预测的新屋盖分别进行试验,结合由参考屋盖试验萃取的本征模态和由新屋盖试验的风压数据计算的主坐标,预测出新屋盖未知区域的风压时间序列.文中对风压场重建和预测的效果作了分析,而且比较了根据测量的风压数据和预测的风压数据所计算的屋盖风致响应.     

简支梁振台的理论解及位移测试

利用由机械振动理论推导出的等截面简支梁的理论解,推导出了带集中质量的简支梁振动台的理论解,并通过分析动态条件下简支梁的位移与应变之间的关系,证明了:在动态条件下梁的位移与应变之间存在很好的正比关系。利用梁的位移与应变之间正比关系,如果在梁上适当位置粘贴应变片,通过测试应变就能准确地测得梁的动态位移。本文通过实例证明了该方法确实可行,理论解与实测结果非常吻合。这为简支梁的动态测试提供了有效而简便的方法。     

Quadrilateral isoparametric finite elements for plane elastic Cosserat bodies＊

4-node, 8-node and 8(4)-node quadrilateral plane isoparametric elements are used for the solution of boundary value problems in linear isotropic Cosserat elasticity. The patch test is applied to validate the finite elements. Engineering problems of stress concentration around a circular hole in plane strain condition and mechanical behaviors of heterogeneous materials with rigid inclusions and pores are computed to test the accuracy and capability of these three types of finite elements.The project supported by the National Natural Science Foundation of China (10225212, 50178016, 10421002) and the Program for Changjiang Scholars and Innovative Research Team in University of China The English text was polished by Keren Wang.